MariaDB社区

标题: 新版本MySQL Server 5.1.29-rc 发布了 [打印本页]

---

作者: kider    时间: 2008-10-28 10:22
标题: 新版本MySQL Server 5.1.29-rc 发布了
官方发布了5.1最新版本，MySQL Server 5.1.29-rc 是做为正式版发布的稳定候选版本。

下载：
http://dev.mysql.com/downloads/


此版本更多详细内容如下：
===============================

We are proud to present to you the MySQL Server 5.1.29-rc release, a new "release candidate" version of the popular open source database.

Bear in mind that this is still a "candidate" release, and as with any other pre-production release, caution should be taken when installing on production level systems or systems with critical data.
For production level systems using 5.0, we would like to direct your attention to the product description of MySQL Enterprise at:

    http://mysql.com/products/enterprise/

The MySQL 5.1.29-rc release is now available in source and binary form for a number of platforms from our download pages at

    http://dev.mysql.com/downloads/

and mirror sites. Note that not all mirror sites may be up to date at this point in time, so if you can't find this version on some mirror, please try again later or choose another download site.

We welcome and appreciate your feedback, bug reports, bug fixes, patches etc.:

    http://forge.mysql.com/wiki/Contributing

The following section lists the changes from version to version in the MySQL source code since the latest released version of MySQL 5.1, the MySQL 5.1.28-rc release. It can also be viewed online at

  http://dev.mysql.com/doc/refman/5.1/en/news-5-1-29.html

Sincerely,

Kent Boortz
The MySQL build team at Sun Microsystems

=======================================================================

Functionality added or changed:


* Important Change: The --skip-thread-priority option is now

deprecated in MySQL 5.1 and is removed in MySQL 6.0 such that

the server won't change the thread priorities by default.


Giving threads different priorities might yield marginal

improvements in some platforms (where it actually works), but

it might instead cause significant degradation depending on

the thread count and number of processors. Meddling with the

thread priorities is a not a safe bet as it is very dependent

on the behavior of the CPU scheduler and system where MySQL is

being run.

(Bug#35164: http://bugs.mysql.com/35164,

Bug#37536: http://bugs.mysql.com/37536)


* Important Change: The --log option now is deprecated and will

be removed (along with the log system variable) in the future.

Instead, use the --general_log option to enable the general

query log and the --general_log_file=file_name option to set

the general query log filename. The values of these options

are available in the general_log and general_log_file system

variables, which can be changed at runtime.


Similar changes were made for the --log-slow-queries option

and log_slow_queries system variable. You should use the

--slow_query_log and --slow_query_log_file=file_name options

instead (and the slow_query_log and slow_query_log_file system

variables).


* The SHOW PROFILES and SHOW PROFILE statements were added to

display statement profile data, and the accompanying

"INFORMATION_SCHEMA.PROFILING" table. Profiling is controlled

via the 'profiling' and 'profiling_history_size' session

variables. (Community contribution by Jeremy Cole)


* The BUILD/compile-solaris-* scripts now compile MySQL with the

mtmalloc library rather than malloc.

(Bug#38727: http://bugs.mysql.com/38727)

Bugs fixed:


* Incompatible Change: Replication: The default binary logging

mode has been changed from MIXED to STATEMENT for

compatibility with MySQL 5.0.

(Bug#39812: http://bugs.mysql.com/39812)


* Incompatible Change: In connection with view creation, the

server created arc directories inside database directories and

maintained useless copies of .frm files there. Creation and

renaming procedures of those copies as well as creation of arc

directories has been discontinued.


This change does cause a problem when downgrading to older

server versions which manifests itself under these

circumstances:


1. Create a view v_orig in MySQL 5.1.29 or higher.

2. Rename the view to v_new and then back to v_orig.

3. Downgrade to an older 5.1.x server and run mysql_upgrade.

4. Try to rename v_orig to v_new again. This operation

fails.


As a workaround to avoid this problem, use either of these

approaches:

+ Dump your data using mysqldump before downgrading and

reload the dump file after downgrading.

+ Instead of renaming a view after the downgrade, drop it

and recreate it.

(Bug#17823: http://bugs.mysql.com/17823)

See also Bug#40021: http://bugs.mysql.com/40021


* Important Change: Replication: The SUPER privilege is now

required to change the session value of binlog_format as well

as its global value. For more information about binlog_format,

see Section 15.1.2, "Replication Formats."

(Bug#39106: http://bugs.mysql.com/39106)


* Partitioning: Replication: Replication to partitioned MyISAM

tables could be slow with row-based binary logging.

(Bug#35843: http://bugs.mysql.com/35843)


* Partitioning: If an error occurred when evaluating a column of

a partitioned table for the partitioning function, the row

could be inserted anyway.

(Bug#38083: http://bugs.mysql.com/38083)


* Partitioning: Using INSERT ... SELECT to insert records into a

partitioned MyISAM table could fail if some partitions were

empty and others are not.

(Bug#38005: http://bugs.mysql.com/38005)


* Partitioning: Ordered range scans on partitioned tables were

not always handled correctly. In some cases this caused some

rows to be returned twice. The same issue also caused GROUP BY

query results to be aggregated incorrectly.

(Bug#30573: http://bugs.mysql.com/30573,

Bug#33257: http://bugs.mysql.com/33257,

Bug#33555: http://bugs.mysql.com/33555)


* Replication: Server code used in binary logging could in some

cases be invoked even though binary logging was not actually

enabled, leading to asserts and other server errors.

(Bug#38798: http://bugs.mysql.com/38798)


* Replication: Replication of BLACKHOLE tables did not work with

row-based binary logging.

(Bug#38360: http://bugs.mysql.com/38360)


* Replication: In some cases, a replication master sent a

special event to a reconnecting slave to keep the slave's

temporary tables, but they still had references to the "old"

slave SQL thread and used them to access that thread's data.

(Bug#38269: http://bugs.mysql.com/38269)


* Replication: Replication filtering rules were inappropiately

applied when executing BINLOG pseudo-queries. One way in which

this problem showed itself was that, when replaying a binary

log with mysqlbinlog, RBR events were sometimes not executed

if the --replicate-do-db option was specified. Now replication

rules are applied only to those events executed by the slave

SQL thread.

(Bug#36099: http://bugs.mysql.com/36099)


* Replication: For a CREATE TABLE ... SELECT statement that

creates a table in a database other than the current one, the

table could be created in the wrong database on replication

slaves if row-based binary logging is used.

(Bug#34707: http://bugs.mysql.com/34707)


* Replication: A statement did not always commit or roll back

correctly when the server was shut down; the error could be

triggered by having a failing UPDATE or INSERT statement on a

transactional table, causing an implicit rollback.

(Bug#32709: http://bugs.mysql.com/32709)

See also Bug#38262: http://bugs.mysql.com/38262


* CHECK TABLE ... FOR UPGRADE did not check for incompatible

collation changes made in MySQL 5.0.48.

(Bug#39585: http://bugs.mysql.com/39585)


* The Sun Studio compiler failed to build debug versions of the

server due to use of features specific to gcc.

(Bug#39451: http://bugs.mysql.com/39451)


* For a TIMESTAMP column in an InnoDB table, testing the column

with multiple conditions in the WHERE clause caused a server crash.

(Bug#39353: http://bugs.mysql.com/39353)


* References to local variables in stored procedures are

replaced with NAME_CONST(name, value) when written to the

binary log. However, an "illegal mix of collation" error might

occur when executing the log contents if the value's collation

differed from that of the variable. Now information about the

variable collation is written as well.

(Bug#39182: http://bugs.mysql.com/39182)


* Queries of the form SELECT ... REGEXP BINARY NULL could lead

to a hung or crashed server.

(Bug#39021: http://bugs.mysql.com/39021)


* Statements of the form INSERT ... SELECT .. ON DUPLICATE KEY

UPDATE col_name = DEFAULT could result in a server crash.

(Bug#39002: http://bugs.mysql.com/39002)


* Column names constructed due to wild-card expansion done

inside a stored procedure could point to freed memory if the

expansion was performed after the first call to the stored

procedure. (Bug#38823: http://bugs.mysql.com/38823)


* Repeated CREATE TABLE ... SELECT statements, where the created

table contained an AUTO_INCREMENT column, could lead to an

assertion failure. (Bug#38821: http://bugs.mysql.com/38821)


* For deadlock between two transactions that required a timeout

to resolve, all server tables became inaccessible for the

duration of the deadlock.

(Bug#38804: http://bugs.mysql.com/38804)


* When inserting a string into a duplicate-key error message,

the server could improperly interpret the string, resulting in

a crash. (Bug#38701: http://bugs.mysql.com/38701)


* A race condition between threads sometimes caused unallocated

memory to be addressed.

(Bug#38692: http://bugs.mysql.com/38692)


* A server crash resulted from concurrent execution of a

multiple-table UPDATE that used a NATURAL or USING join

together with FLUSH TABLES WITH READ LOCK or ALTER TABLE for

the table being updated.

(Bug#38691: http://bugs.mysql.com/38691)


* On ActiveState Perl, mysql-test-run.pl --start-and-exit

started but did not exit.

(Bug#38629: http://bugs.mysql.com/38629)


* An uninitialized variable in the query profiling code was

corrected (detected by Valgrind).

(Bug#38560: http://bugs.mysql.com/38560)


* A server crash resulted from execution of an UPDATE that used

a derived table together with FLUSH TABLES.

(Bug#38499: http://bugs.mysql.com/38499)


* Stored procedures involving substrings could crash the server

on certain platforms due to invalid memory reads.

(Bug#38469: http://bugs.mysql.com/38469)


* The handlerton-to-plugin mapping implementation did not free

handler plugin references when the plugin was uninstalled,

resulting in a server crash after several install/uninstall

cycles. Also, on Mac OS X, the server crashed when trying to

access an EXAMPLE table after the EXAMPLE plugin was

installed.

(Bug#37958: http://bugs.mysql.com/37958)


* The server crashed if an argument to a stored procedure was a

subquery that returned more than one row.

(Bug#37949: http://bugs.mysql.com/37949)


* When analyzing the possible index use cases, the server was

incorrectly reusing an internal structure, leading to a server

crash.

(Bug#37943: http://bugs.mysql.com/37943)


* Access checks were skipped for SHOW PROCEDURE STATUS and SHOW

FUNCTION STATUS, which could lead to a server crash or

insufficient access checks in subsequent statements.

(Bug#37908: http://bugs.mysql.com/37908)


* The <=> operator could return incorrect results when comparing

NULL to DATE, TIME, or DATETIME values.

(Bug#37526: http://bugs.mysql.com/37526)


* The combination of a subquery with a GROUP BY, an aggregate

function calculated outside the subquery, and a GROUP BY on

the outer SELECT could cause the server to crash.

(Bug#37348: http://bugs.mysql.com/37348)


* The NO_BACKSLASH_ESCAPES SQL mode was ignored for LOAD DATA

INFILE and SELECT INTO ... OUTFILE. The setting is taken into

account now.

(Bug#37114: http://bugs.mysql.com/37114)


* In some cases, references to views were confused with

references to anonymous tables and privilege checking was not

performed.

(Bug#36086: http://bugs.mysql.com/36086)


* For crash reports on Windows, symbol names in stack traces

were not correctly resolved.

(Bug#35987: http://bugs.mysql.com/35987)


* ALTER EVENT changed the PRESERVE attribute of an event even

when PRESERVE was not specified in the statement.

(Bug#35981: http://bugs.mysql.com/35981)


* Hostname values in SQL statements were not being checked for

'@', which is illegal according to RFC952.

(Bug#35924: http://bugs.mysql.com/35924)


* mysql_install_db failed on machines that had the hostname set

to localhost.

(Bug#35754: http://bugs.mysql.com/35754)


* Dynamic plugins failed to load on i5/OS.

(Bug#35743: http://bugs.mysql.com/35743)


* With the PAD_CHAR_TO_FULL_LENGTH SQL mode enabled, a ucs2 CHAR

column returned additional garbage after trailing space

characters.

(Bug#35720: http://bugs.mysql.com/35720)


* With binary logging enabled, CREATE TABLE ... SELECT failed if

the source table was a log table.

(Bug#34306: http://bugs.mysql.com/34306)


* A trigger for an InnoDB table activating multiple times could

lead to AUTO_INCREMENT gaps.

(Bug#31612: http://bugs.mysql.com/31612)


* mysqldump could fail to dump views containing a large number

of columns.

(Bug#31434: http://bugs.mysql.com/31434)


* The server could improperly type user-defined variables used

in the select list of a query.

(Bug#26020: http://bugs.mysql.com/26020)


* For access to the INFORMATION_SCHEMA.VIEWS table, the server

did not check the SHOW VIEW and SELECT provileges, leading to

inconsistency between output from that table and the SHOW

CREATE VIEW statement.

(Bug#22763: http://bugs.mysql.com/22763)


* mysqld_safe would sometimes fail to remove the pid file for

the old mysql process after a crash. As a result, the server

would fail to start due to a false A mysqld process already

exists... error.

(Bug#11122: http://bugs.mysql.com/11122)

---

欢迎光临 MariaDB社区 (http://123.56.88.72/)

Powered by Discuz! X3.2